Testing is a short, pressure-based check of the valves that keep irrigation and commercial water out of the drinking supply. If your assembly is leaking, damaged or past its due date, it is worth scheduling soon. Call the number on this page to be connected with a local plumber in New Port Richey.

After new construction or a remodel
A new sprinkler system, a restaurant build-out or an added pool line usually comes with a required assembly, and the permit office or the utility may want a passing test before the work is signed off. A local plumber can handle that final check.
The occasional freeze
Hard freezes are rare in west-central Florida, but they do arrive on a few winter nights, and exposed above-ground assemblies take the hit. A cracked body or split bonnet may not leak until the sprinklers run again. If a cold snap has passed through, check the assembly for damage before the next watering cycle, since a hairline crack can open under pressure.
Location and access add time
A device on an exposed pipe beside a house is a quick visit. One tucked behind a landscaped bed, inside a locked utility room or below grade in a flooded box takes longer, and a business with several assemblies spread around the building takes longer still. Telling the plumber where yours is located helps them quote accurately.
How the test goes
- The plumber notes the assembly's make, size and serial number.
- Water to the device is shut off briefly and gauges are attached.
- Each check valve and relief valve is tested against set pressures.
- Pass or fail is recorded, with a repair if needed.
- The result is sent to the utility.
Expect irrigation to be off for a short while.
Seasonal checklist
| Season | Do this |
|---|---|
| Spring | Run each zone and watch the relief port |
| Early summer | Inspect housings and clear the valve box before storms |
| After a storm | Shut off irrigation and look for flooding or damage |
| Cold snap | Protect or drain exposed assemblies |
Following the calendar keeps the assembly ready for its next test, with no scramble when the notice arrives.
Who to call for what in New Port Richey
the City of New Port Richey Utilities supplies water to most New Port Richey addresses; wastewater goes to New Port Richey Utilities. Some addresses near the edges are served differently; check your bill.
If the leak is at the meter or in the street, call New Port Richey Utilities at (727) 841-4570; a plumber handles the pipe on the house side.
For a gas odor in New Port Richey, get everyone out, then call 911 and Peoples Gas at 877-832-6747 from a safe distance.
the City of New Port Richey Building Division issues the plumbing permits for New Port Richey addresses.
Calls from New Port Richey are often matched with plumbers who also work in Holiday, Port Richey and Hudson.
More about New Port Richey
Calls come in from across New Port Richey, including around Hacienda Hotel, Sims Park and Orange Lake, Pithlachascotee River.
Backflow Testing questions in New Port Richey
Is reclaimed water covered by backflow rules?
Why is my assembly spitting water?
Does a freeze damage backflow assemblies?
How often does an assembly need testing?
More plumbing services in New Port Richey
Backflow Testing nearby
Helpful guides
Sources
Last updated: