If you suspect a slab leak, shut off the water at the main and check the meter. A plumber can then locate the leak with pressure tests and listening gear, and offer a spot repair, a reroute through the attic or a longer replacement. Call the number on this page to be connected with a local plumber in San Antonio.

How to recognize a slab leak
- A warm or hot area on the floor, often from a leaking hot line
- Water sounds under the floor while every fixture is off
- A meter that keeps moving after every tap is closed
- Cracked tile, lifted flooring or damp baseboards
- Low pressure or a sudden jump in the bill
Older homes and cast iron
Homes built before roughly the mid-1970s often have cast iron drain lines under the slab, and those can corrode and crack with age. A drain leak differs from a pressurized supply leak, but both can wet a slab. Ask the plumber whether a camera inspection should accompany the leak trace.
Repair options for a slab leak
Once the leak is located, there are usually three paths: break into the slab and repair the pipe at the spot, reroute the line through walls or the attic and abandon the buried section, or replace a longer run if the pipe is failing everywhere. Each has different cost, disruption and lasting value.
San Antonio water, sewer and gas
In San Antonio, drinking water and service lines fall under the City of San Antonio Water Department, and San Antonio Water handles the sewer side. Some addresses near the edges are served differently; check your bill.
San Antonio Water takes calls about mains, meters and street leaks at 352-588-2127.
For a gas odor in San Antonio, get everyone out, then call 911 and Peoples Gas at 877-832-6747 from a safe distance.
When a job needs a permit, the plumber pulls it from the City of San Antonio, with permit services through the City of Dade City Building Department.
Plumbers who take calls here usually also cover Wesley Chapel, Dade City and Zephyrhills.
Factors that change the bill
- Leak detection and the equipment used, which varies with house size and layout
- Concrete cutting and patching after the repair is made
- Type of repair: spot repair, reroute or repipe
- Flooring removal and replacement, which is often quoted separately
- Permits and inspections, when the work requires them
The repair visit step by step
- The plumber shuts off the water and confirms the leak.
- The area is marked and, for a spot repair, the slab is cut.
- The pipe is repaired or rerouted and pressure tested.
- The concrete is patched and the floor is restored or left for other trades.
- You recheck the meter with every tap closed.
Slab Leak Repair questions in San Antonio
Can a slab leak be repaired without breaking the floor in San Antonio?
How do I check a plumber's credentials in Florida?
Is this service a plumbing company?
Does a slab leak cause mold in San Antonio?
More plumbing services in San Antonio
Slab Leak Repair nearby
Sources
Last updated: