Backflow testing means a certified plumber attaches a gauge to your assembly, checks that its valves hold, and sends the result to the water utility. Homes with in-ground sprinklers and most commercial buildings nearby fall under this. Call the number on this page to be connected with a local plumber in St. Petersburg.

Signs the assembly needs attention
A few things point to an assembly that should be checked soon:
- A written request from the utility for test results
- Water spitting or dripping from the relief port
- A sprinkler system installed or changed recently
- A bent, cracked or flooded assembly after a storm or a mower strike
- A new business tenant taking over a unit
Why irrigation drives most tests here
Florida lawns and landscaping lean on sprinklers for much of the year, and every zone is fed from the same pipe that supplies the kitchen tap. The backflow assembly is the only barrier keeping fertilizer, stagnant standing water or soil from creeping backward when pressure drops. That is why so many homes in this area fall under testing rules.
Because many homes in this area were built in the 1960s, irrigation retrofits are common, and older retrofits sometimes lack a proper backflow device altogether.
Location and access add time
A device on an exposed pipe beside a house is a quick visit. One tucked behind a landscaped bed, inside a locked utility room or below grade in a flooded box takes longer, and a business with several assemblies spread around the building takes longer still. Telling the plumber where yours is located helps them quote accurately.
Know your providers in St. Petersburg
Most St. Petersburg households get their water from the City of St. Petersburg Water Resources and send wastewater to St. Pete Water Resources.
If the leak is at the meter or in the street, call St. Pete Water Resources at 727-893-7261; a plumber handles the pipe on the house side.
For a gas odor in St. Petersburg, get everyone out, then call 911 and Peoples Gas at 877-832-6747 from a safe distance.
Permits for jobs like water heater changes and repiping go through the City of St. Petersburg Building & Permitting.
Calls from St. Petersburg are often matched with plumbers who also work in Pinellas Park, Seminole and Largo.
What the paperwork looks like
The report lists the device make, size and serial number, the test date, each gauge reading, a pass or fail result and the tester's certification number. Keep a copy with your irrigation records. If a sale, refinance or tenant change raises questions later, you can show the assembly was tested and approved on a specific date.
Keeping an assembly healthy
- Keep the valve box clear of mulch, soil and standing water.
- Never cap or plug the relief port.
- Keep hose ends out of buckets, pools and fertilizer tanks.
- Shield above-ground units from mowers and trimmers.
- Shut off irrigation before a rare freeze arrives.
Small habits save an expensive failure later, and they take only a few minutes a season.
More about St. Petersburg
Calls come in from across St. Petersburg, including around Snell Isle, Old Northeast, Historic Roser Park.
Backflow Testing questions in St. Petersburg
Does my St. Petersburg home need a backflow test?
What happens if my assembly fails?
Who do I call about a leak at the meter in St. Petersburg?
Does a freeze damage backflow assemblies?
More plumbing services in St. Petersburg
Backflow Testing nearby
Helpful guides
Sources
Last updated: