Well pump repair is for homes with their own water supply, not for those on public mains. Where a property has a private well, a plumber can restore pressure by repairing or replacing the pump and its controls. Call the number on this page to be connected with a local plumber in Lithia.

Quick checks before you call
- Look at the breaker for the well pump.
- Read the pressure gauge on the tank.
- Listen for the pump motor humming or clicking.
- Check whether other taps are affected too.
Share what you found with the plumber you reach; it speeds up the diagnosis. Describe each symptom plainly, and mention anything that changed recently, such as a storm or new irrigation.
Sandy soil and well screens
Much of Tampa Bay sits on sandy soil, and a worn or damaged well screen lets fine sand into the pump and the household lines. Sand scours impellers and clogs aerators. If water suddenly looks gritty, the pump and the screen both need a look, and grit collecting in faucet aerators is often the first clue owners see. Fine sand left unchecked can ruin a good pump within a season.
Lithia water, sewer and gas
Water service in Lithia comes from Hillsborough County Water Resources Department. Sewer service is handled by Hillsborough County Water. Some addresses near the edges are served differently; check your bill.
Hillsborough County Water takes calls about mains, meters and street leaks at (813) 307-1000.
Peoples Gas is the gas utility for much of Lithia. If you smell gas, leave first, then call 911 and Peoples Gas at 877-832-6747 from outside.
Hillsborough County Development Services issues the plumbing permits for Lithia addresses.
Plumbers who take calls here usually also cover Valrico, Riverview and Brandon.
Why diagnosis comes first
Replacing a pump without testing is a common and expensive mistake. A pump that looks dead may only need a new switch, and a short-cycling system is often the tank, not the pump. Paying for a thorough test usually saves money compared with swapping parts until something works, and it protects an owner from buying a part that was never broken.
After the repair
Once the pump runs, the plumber should confirm the tank pressure is set correctly, the switch cuts in and out at the right points and the water runs clear. Some air may sputter out of taps for a short time. If sand or discoloration remains, mention it so it can be traced, and a follow-up visit is normal.
Before hurricane season
Fill clean containers with drinking water, know where the pump breaker is and consider how you would run the well if power fails. After a storm passes, check for flooding around the well head, since floodwater can contaminate the supply. Flooded wells often need testing before the water is used again. Keep drinking water on hand until the well is confirmed safe.
Well Pump Repair questions in Lithia
Is my Lithia home on a private well?
Why is well water sandy or cloudy near Lithia?
What if my well has no power after a storm?
Does a private well need a pressure tank?
More plumbing services in Lithia
Well Pump Repair nearby
Helpful guides
Sources
Last updated: